Intended Use; Approvals And Certifications - Honeywell SM-RI-X Instruction Manual

Honeywell

1.1 Intended use


CAUTION!
Responsibility for the use of the meter in terms of suitability,
intended use and the corrosion resistance of the materials to the
medium is solely in the hands of the operator.

INFORMATION!
The manufacturer shall not be liable for damage caused by
improper or inappropriate use.

1.2 Approvals and certifications

CE marking / EU declaration of conformity
The manufacturer certifies conformity with the EU
declaration of conformity and by attaching the CE marking.
The
requirements of the relevant EU Directives.
Comprehensive
Directives
certifications, is contained in the EU declaration of
conformity.
The EU declaration of conformity is included in the delivery
and is also available to download at www.docuthek.com.
ATEX/IECEx

DANGER!
The turbine gas meters and quantometers are suitable for use
in Zone 1 hazardous areas and are approved with the following
certification (IECEx) and manufacturer's declaration (ATEX):
 II 2G Ex h IIC T4 Gb
IECEx TUR 16.0043x (IECEx)
203104000-0411
10
measuring
information
and Standards,
 See chapter 5.3 Approvals and Annex A –
Standards and Norms, for details of other
approvals and Directives.
73024521a
instrument meets
on
as
TÜV Rheinland Industrieservice GmbH
Am Grauen Stein | 51105 Köln | Germany
DEKRA Certification B.V.
(ATEX)
Meander 1051 | 6825 MJ Arnheim | The
Netherlands
© Elster GmbH | All rights reserved. Subject to modification
the statutory
the applicable
well as recognized
EU