Swivel Tube Adjustment
The adjustable swivel tube allows the HVLP–Turbine
Gun to be held in any position why spraying. To adjust
the position of the tube in the cup:
1. Loosen the nut (A) with a wrench (42).
2. Rotate the cup to the desired spray position.
A
Cup
Swivel tube
Swivel tube positioned for spraying DOWN
Fig. 16
Converting the HVLP Turbine Cup Feed
Gun to Pressure Feed
1. Using a pair of pliers, remove air pressure tube
(30b) from air stem (31).
2. Hold adapter fitting (28) with wrench. Remove cup
assembly.
Spraying Techniques
Swivel tube
(Parts, page 22).
3. Retighten the nut (A) with a wrench (42).
A
Cup
Swivel tube positioned for spraying UP
3. Remove air stem (31) from gun body (1).
4. Apply medium strength thread locker to set screw
(36) and assemble into gun body (1).
NOTE: To convert from pressure feed cup to cup
feed, reverse these instructions.
TI0804
309205
13