Advertisement
Installation Manual Double DIN Kit
1.
Disconnect the negative
battery termnial to prevent an
accidental short cirucit
2.
Unclip and remove the shifter
trim panel.
3.
Unclip and remove the
radio/climate control
trim panel
4.
Unclip and remove the display
trim panel above radio.
Remove 4 Phillips screws securing
the radio.
Remove 4 Phillips screws securing
the climate control to the factory
trim panel
5.
Attach the climate control unit
and the hazard switch
to the trim plate using the factory
hardware.
6.
Unclip and remove the shifter
trim panel.
7.
Attach the 8 panel clips to
the trim palte
8.
Attach the Dobule DIN bracktes
to the Pioneer unit, connect the
wiring harness.
Reassemble dash in reverse order
of disassembly.
Advertisement
