Replacing A Sic - H3C MSR 56-60 Replacement Procedures
Hide thumbs
Also See for MSR 56-60:
- Command reference manual (389 pages) ,
- Configuration manual (288 pages) ,
- Manual (38 pages)
Table of Contents
Advertisement
Figure 18 Removing the Micro SD card
Replacing a SIC
CAUTION:
SIC interface modules are not hot swappable. Make sure the router is powered off before installing
a SIC.
To replace a SIC:
1.
Completely loosen the captive screws of the SIC.
2.
Gently pull the SIC out along the guide rails.
3.
Install a new SIC. For the installation procedure, see "Installing the router."
If you do not install a SIC, install a filler panel and tighten the screws.
Figure 19 Pulling a SIC out
12
Advertisement
Table of Contents
