Dhcp Server Netbios-Type - H3C S9500 Series Command Manual

Command Manual – DHCP
H3C S9500 Series Routing Switches
View
VLAN interface view, system view
Parameters
ip-address: NetBIOS server IP address. You can specify up to eight IP addresses
(separated by spaces) in one command.
interface vlan-interface vlan-id [ to vlan-interface vlan-id ]: Specifies one VLAN
interface, or a range of VLAN interfaces.
all: Specifies all VLAN interfaces or all configured IP addresses.
Description
Use the dhcp server nbns-list command to configure one or more NetBIOS server IP
addresses for the DHCP address pool of the current VLAN interface, or for the DHCP
address pool(s) of the specified VLAN interface(s).
Use the undo dhcp server nbns-list command to remove one or all NetBIOS server
IP addresses from the DHCP address pool of current VLAN interface, or the DHCP
address pool(s) of the specified VLAN interface(s)..
By default, no NetBIOS server IP address is configured.
With eight NetBIOS server addresses already configured, if you add a new one by
executing the dhcp server nbns-list command, the newly configured one overwrites
the oldest one.
Related commands: nbns-list, dhcp server netbios-type.
Examples
# Configure the NetBIOS server with an IP address of 10.12.1.99 for the DHCP address
pool of VLAN-interface 1.
<H3C> system-view
System View: return to User View with Ctrl+Z.
[H3C] interface vlan-interface 1
[H3C-Vlan-interface1] dhcp server nbns-list 10.12.1.99

1.2.9 dhcp server netbios-type

Syntax
In VLAN interface view:
dhcp server netbios-type { b-node | h-node | m-node | p-node }
undo dhcp server netbios-type
In system view:
Chapter 1 DHCP Configuration Commands
1-10