H3C S9500 Series Command Manual page 22

Command Manual – ARP
H3C S9500 Series Routing Switches
View
Any view
Parameters
None
Description
Use the display arp timer aging command to view the current setting of the dynamic
ARP aging timer.
Related commands: arp timer aging.
Examples
# Display the current setting of the ARP aging timer.
<H3C> display arp timer aging
Current ARP aging time is 10 minute(s)
You can see that the ARP aging time is 10 minutes.
1.1.14 display debugging arp
Syntax
display debugging arp
View
Any view
Parameters
None
Description
Use the display debugging arp command to display the ARP packet debugging
information.
Examples
# Display the ARP packet debugging information.
<H3C> display debugging arp
ARP packet debugging switch is on, Source IP Address is 8.8.8.1, Destination
IP Address is 8.8.8.26, Source MAC Address is 000a-ebf2-51a8
Chapter 1 ARP Configuration Commands
1-13