Display Dhcp Server Forbidden-Ip - H3C S9500 Series Command Manual

Command Manual – DHCP
H3C S9500 Series Routing Switches
error: Enables/disables error debugging for the DHCP server, including errors that
occur when the DHCP server processes DHCP packets or assigns IP addresses.
event: Enables/disables event debugging for the DHCP server, including the assigning
of IP addresses and timing out of ping packets.
packet: Enables/disables packet debugging for the DHCP server, including DHCP
packets and ping packets.
Description
Use the debugging dhcp server command to enable specified debugging for the
DHCP server.
Use the undo debugging dhcp server command to disable specified debugging for
the DHCP server.
No debugging is enabled by default.
Examples
# Enable event debugging for the DHCP server.
<H3C> debugging dhcp server event

1.2.2 display dhcp server forbidden-ip

Syntax
display dhcp server forbidden-ip
View
Any view
Parameters
None
Description
Use the display dhcp server forbidden-ip command to display forbidden IP
addresses in the DHCP address pool.
Examples
# Display forbidden IP addresses in the DHCP address pool.
<H3C> display dhcp server forbidden-ip
Forbidden IP Range from 3.3.3.1
Forbidden IP Range from 3.3.3.4
Forbidden IP Range from 3.3.3.101
Forbidden IP Range from 17.9.0.1
Forbidden IP Range from 17.9.0.3
Chapter 1 DHCP Configuration Commands
to
to
to
to
to
1-4
3.3.3.1
3.3.3.99
3.3.3.254
17.9.0.1
17.9.0.5