Table of Contents
Advertisement
Available languages
Available languages
Options
You can customize your wash by adding OPTIONS to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins.
See the "Laundry Guide" for an overview of possible options
for each Wash Cycle selection.
You can select more than one option for a cycle. Some
options cannot be added to some cycles.
If an option is available with a selected cycle, the light for that
option will glow when selected.
If an option is unavailable with a selected cycle, there will be a
short tone, and the light for that option will not glow when
selected.
Extra Rinse
An extra rinse can be used to ensure the removal of detergent or
bleach residue from garments. This option provides an addtional
rinse with the same water temperature as the first rinse.
Rinse Hold
Use this option to avoid wrinkling of your laundry when a load
cannot be removed from the washer immediately. The wash cycle
is paused before the final drain and spin phase so that the
laundry stays in the rinse water until the cycle is continued. This
provides optimal wrinkle care of your wet laundry. The door stays
locked during the Rinse Hold cycle and the indicator light is
flashing. Press RINSE HOLD to finish the cycle and unload the
washer.
Modifiers
Preset cycle settings of Water Temperature, Wash/Rinse, and
Spin Speed can be changed. You can change a modifier after
starting a cycle anytime before the selected modifier begins.
To change the water temperature, select the WATER TEMP
button until the desired setting glows.
14
To change the spin speed, select the SPIN SPEED button
until the desired setting glows.
To change the loudness of the End of Cycle Signal, select
END OF CYCLE SIGNAL.
To change cycle time, select SOIL LEVEL button.
Wash/Rinse Temp
Select a water temperature based on the type of load you are
washing. Use the warmest water safe for fabrics. Follow garment
label instructions.
Warm rinses leave the loads dryer than cold rinses. Warm rinses
increase wrinkling. In cold climates, a warm rinse makes the load
more comfortable to handle. Cold rinses save energy.
Temperature Guide
Wash Water Temperature
HOT
122°F (50°C) or above
WARM
104°F (40°C)
COLD
77°F (25°C)
In wash water temperatures colder than 70°F (21°C), detergents
do not dissolve well. Soils may be difficult to remove.
ACCUWASH™ Automatic Temperature Control
The ACCUWASH™ control electronically senses and maintains a
uniform water temperature. ACCUWASH control regulates
incoming hot and cold water. ACCUWASH control is
automatically turned On when a cycle is selected. (See "Preset
Cycle Settings" in "Cycles.")
ACCUWASH ensures consistent cleaning.
ACCUWASH control works for all wash and rinse temperature
settings.
Suggested Fabrics
Whites and pastels
Heavy soils
Bright colors
Moderate to light soils
Colors that bleed or fade
Light soils
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the duet Front-Load Washer and is the answer not in the manual?
Questions and answers
where is and how to clean lint trap whirlpool duet frontend loader
To clean the lint trap (drain pump filter) on a Whirlpool Duet front-load washer:
1. Locate the drain pump filter behind the front lower panel of the washer.
2. Remove the front panel to access the filter.
3. Place a towel or shallow pan under the filter to catch any water.
4. Unscrew the filter cap and remove it.
5. Clean out any debris or lint from the filter.
6. Rinse the filter under running water.
7. Reinstall the filter and secure the panel.
Clean the filter periodically to maintain washer performance.
This answer is automatically generated
How to use the spin cycle only
To use the spin cycle only on a Whirlpool Duet Front-Load Washer, follow these steps:
1. Select PAUSE/CANCEL to stop any current cycle.
2. Select DRAIN/SPIN on the control panel.
3. Press and hold HOLD TO START for about 1 second to begin the spin cycle.
4. When the spin is complete, the door will unlock, and you can remove the items.
If needed, you can reduce the spin speed by selecting the desired speed from the SPIN SPEED modifier.
This answer is automatically generated
is there a way to have a shorter cycle than 27 minutes? Please instruct.
The Whirlpool Duet Front-Load Washer has a Quick Wash cycle designed for loads that are needed in a hurry. This cycle combines fast-speed tumbling, a shortened wash time, and high-speed spin to shorten drying time. However, the exact duration of the Quick Wash cycle is not specified in the provided information. If the Quick Wash cycle is shorter than 27 minutes, then the washer can have a shorter cycle.
This answer is automatically generated