Wall Mount Bracket - Honeywell PC43K User Manual

Wall Mount Bracket

You can mount the kiosk vertically on a wall or other surface. The kiosk must be
mounted so the media output slot faces down. Use the following guideline for
selecting a mounting location:
•
•
•
•
Caution: Be sure the mounting surface can safely support the weight of
Refer to the wall mount template and drill holes on the mounting surface.
1. Install the mounting hardware. If you need to use anchors, use them first.
2. Place the kiosk mounting holes on the mounting hardware and slide the kiosk
46
Choose a location within 1.5m (5ft) of an electrical outlet.
Choose M5 mounting hardware (not supplied) for the mounting surface.
The mounting hardware must provide at least 7mm (0.275 in) of clearance
between the mounting surface and the bottom of the screw head. The screw
head must be 6 to 8m (0.24 in to 0.33 in).
Honeywell recommends using pan-head or flathead screws with appropriate
anchors for drywall, cement, concrete block, or plasterboard walls. Use wood
screws only for wooden surfaces, and ensure the screw is long enough to be
sunk to a depth of at least 15mm (0.59 in).
the kiosk.
to lock it in place.
PC43K User Guide