ADDER SmartView User Manual page 18

Standard PS/2 mouse data uses a different data format to IntelliMouse data and so
two reset functions are provided on the SmartView. The type of data format
expected by the PC depends upon the driver and the type of mouse that was
connected when the driver was booted. The following table may be used as a guide.
Note that the mouse reset functions predict the likely mouse resolution settings but
may not restore the speed or sensitivity of the mouse exactly as they were when the
PC originally booted.
Type of mouse / system
Connected at bootup
PS/2
PS/2
IntelliMouse / SmartView
IntelliMouse / SmartView
To restore lost mouse movement on a CPU connected to the SmartView:
1) Select the CPU that has lost its mouse movement
2) Press the select key on the front of the SmartView for 5 seconds until 'C' is
displayed. You are now in configure mode.
3) To restore a PS/2 mouse connection press
Or, to restore an IntelliMouse connection press
4) Exit from configure mode by typing
5) Test the mouse movement by moving the mouse a short distance.
F5 - Restore PS/2 mouse function
F6 - Restore IntelliMouse function
SmartView
Driver type Likely expected
data format
PS/2 only PS/2
IntelliMouse PS/2
PS/2 only PS/2
IntelliMouse IntelliMouse
F 5 f
f
F 6 f
f
E f
f
Installation and Use
Suggested
restoration
F5
F5
F5
F6
Page 18