Advertisement
Available languages
Available languages
Operating instructions
Starting Your Washer
Be sure to measure and add low foaming, automatic washing machine detergent, then
place a sorted load in the washer before commencing with the cycle. Detergents should
be predissolved
when the wash water temperature is less than 40°C.
1. Select a LOAD SIZE
0 Turn the knob to point at a setting
that describes
the size of load you
want to wash.
0 Set the
knob
anywhere
on or
between
EX SMALL
(a few small
items) and EX LARGE (a full load).
level for best permanent
press
2.
Select WATER
TEMPERATURES
0 Select wash and rinse water tem-
peratures.
0 This drawing
shows a warm wash
(top temperature)
and cold rinse
(bottom
temperature)
selection.
Recommended
wash temperatures
can
be found in your "Laundry
Guide".
I
LOAD SIZES AND WATER LEVELS
I
Forbest cleaning
results, the load
must be able to move freely in the
CAUTIO -
water.ToobigaloadortooIittlewater
DO NOT
can cause wear or tearina
OVERLOAD
WASHER.
of load items.
Approximate
fill with load
EX LARGE 82,i !
MEDIUM 62,l P
EX SMALL 430 P
Advertisement
