Decommissioning The Detector; Disposal; Declaration Of Conformity - Abus Secvest Installation Instructions And User Manual

Decommissioning the detector

Decommissioning the detector
• Select:
Installer mode -> Components -> Detector -> Wireless zones -> Add/Remove detector->
2xy zone
• Select the desired zone (on the desired detector).
• You will receive the message "Reset zone?". Press "Select" and then "Yes".
• Remove the detector's power supply.
• Remove the installation and dismount the detector.

Disposal

Dispose of the device in accordance with EU Directive 2012/19/EU – WEEE (Waste
Electrical and Electronic Equipment). If you have any questions, please contact the
municipal authority responsible for disposal. Information on collection points for waste
equipment can be obtained from your local authority, from local waste disposal
companies or your retailer, for example.

Declaration of conformity

ABUS Security-Center GmbH & Co. KG hereby declares that this type of wireless system, item
number FUBW50120, complies with the RED Directive 2014/53/EU. The full EU Declaration of
Conformity text can be found at: www.abus.com > Item search > FUBW50120 > Downloads
The Declaration of Conformity can also be obtained from the following address:
ABUS Security-Center GmbH & Co. KG
Linker Kreuthweg 5
86444 Affing
GERMANY
60 | E N