Technical Data - Abus Secvest Installation Instructions And User Manual

Technical data

Technical data
Product name
Product description
Item no
Manufacturer
Environmental class
Protection class, IP
protection class
Operating temperature
Storage temperature
Humidity, max.
Housing material
Dimensions (W x H x D)
Weight
Security level
Tamper monitoring
Tamper protection
(detection/protection)
Displays
Optimal installation
height
Detection range
Power supply type
Type of power supply
Operating voltage
Battery undervoltage
threshold
Voltage monitoring
Power consumption
40 | E N
Secvest wireless motion detector, PIR microwave
Passive infrared detector and microwave detector
FUBW50120
ABUS Security-Center GmbH & Co. KG
II (EN 50131-1 + A1:2009 Section 7)
IP34 (internal spaces, in its installed state)
IP = international protection or ingress protection
3 = tools and wires
4 = splashing water
-10°C to +55°C
-10°C to 40°C
Non-condensing average relative humidity 75%
PC/ABS
55 x 115 x 55 mm
0.122 kg (without batteries)
0.180 kg (with batteries)
Grade 2 (EN 50131-1 + A1:2009 Section 6)
yes
Type B (EN 50131-3:2009 Section 8.7)
Status LED for software status, IR programming and displaying
detection/sending (only in the first 30 min)
Between 1.8 m and 2.3 m
12 m x 90°
Cable type W (EN 50131-4:2010 Section 5.6.3.2)
Type C with reference to EN 50131-1:2006+A1:2009+ A2:2017
Section 9 and
EN 50131-6 Section 4.1
4.5 V DC
3.4 V
"Flat battery" fault at < 3.4 V
Batteries spent at 3.1 V
During operation the voltage provided by the batteries is monitored.
If the voltage is below the lower threshold of 3.4 V, a fault report is
sent to the alarm control panel and the user is informed.
20 µA standby current
9 m x 90° with pet-proof jumper