Approved Kombiengines - Stihl FS-KM Instruction Manual

English

Approved KombiEngines

KombiMotors
Only use KombiEngines/Motors
supplied or explicitly approved by STIHL
for use with the attachment.
Depending on the cutting attachment
used, always refer to and observe the
chapter on "Approved Combinations of
Cutting Attachment, Deflector, Handle
and Harness".
This KombiTool may be operated only in
combination with the following
KombiEngines/Motors:
STIHL KM 55 R, KM 56 R, KM 85 R
KM 91 R, KM 94 R, KM 111 R,
KM 131 R1), KM 130 R, KMA 130 R
WARNING
Loop-handled machines must be
equipped with a barrier bar.
Brushcutters with split drive tube
This KombiTool may also be mounted to
STIHL brushcutters (basic power tools)
with a split drive tube (T models).
Operation of this KombiTool is therefore
also permitted on the following power
tool model:
STIHL FR 131 T
1)
outside the EU only
10
WARNING
Refer to the power tool's instruction
manual for use of the barrier bar.
1)
,
FS-KM