Stihl FS-KM Instruction Manual page 14

English
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments, deflectors, handles and
harnesses shown in each row of the
table may be used together. No other
combinations are permitted because of
the risk of accidents.
WARNING
Loop-handled machines must be
equipped with a barrier bar.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 20-2
2 STIHL AutoCut C 25-2
3 STIHL AutoCut 25-2
4 STIHL AutoCut C 26-2
5 STIHL AutoCut 36-2
6 STIHL DuroCut 20-2
7 STIHL PolyCut 20-3
Metal cutting attachments
8 Grass cutting blade 230-2
(230 mm dia.)
9 Grass cutting blade 260-2
(260 mm dia.)
10 Grass cutting blade 230-4
(230 mm dia.)
12
11 Grass cutting blade 230-8
(230 mm dia.)
1)
12 Brush knife 250-3
(250 mm dia.)
13 Chisel tooth circular saw blade 200-
1)2)
22 , chisel tooth circular saw
1)2)
blade 200-22 HP (200 mm dia.)
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stop
14 Deflector for mowing heads
15 Deflector with
16 skirt and blade, for mowing heads
17 Deflector without skirt and blade, for
metal cutting attachments 8 to 13
18 Limit stop for circular saw blades
Handles
19 Loop handle with
20 barrier bar
21 Bike handle
1)
Not approved for KM 55 R, FS 56 R
2)
Not approved for FR 131 T,
KM 55 R, KM 56 R, KM 85 R,
KM 94 R, KM 111 R, KM 131 R,
KMA 130 R
Harnesses
22 Shoulder strap may be used
23 Shoulder strap must be used
24 Full harness may be used
25 Full harness must be used
FS-KM