Leica A60 H Manual page 22

Table clamp
Instructions for safe assembly
The table clamp is designed for tabletops
with a thickness of up to 100 mm.
Before assembly, ensure that the selec-
ted tabletop can carry the weight.
Otherwise persons can be injured and the
stereomicroscope and the specimen can be
damaged.
Leica A60 H
Assembling the Table Clamp
1. Push the table clamp over the tabletop as
far as it will go.
2. Tighten the two screws.
3. Insert the flex arm into the table clamp.
Manual
Adjusting the Table Clamp
If the table clamp does not fit the thickness
of the tabletop, it can be adjusted. To do so,
unscrew the two screws and move the loose
part of the clamp upwards or downwards.
22