Adjusting the Working Height (continued)
Adjusting the working height (swing arm)
1. Hold the horizontal arm securely and
release the safety ring.
2. Move the horizontal arm to the desired
height.
Leica A60 H
3. Tighten the locking screw on the cross-
member.
4. Guide the safety ring to the cross-member
and tighten the clamping screw.
Manual
5. Loosen the locking screw on the cross-
member so that the horizontal arm can be
moved freely again.
Safety measures
After each time the working height is
adjusted, you have to retighten the
safety ring. Otherwise, accidental lowering can
cause damage to the specimen or stereomic-
roscope.
28