—
3.3 Manual handle operation
Warning
Verify the condition of power source
prior to manually transferring. Manual
operation may result in out-of-phase
transfer when both sources are
energized.
To mount the handle in the operat-
ing position, turn the slide switch to
the Manual mode (Hand), lift the
handle from its place inside and
place it to the operating position.
More information, see animation:
Manual and automatic operation
- TruONE® ATS (https://youtu.be/
bosvSPVi2sM).
Manual
mode
1
—
Fig. 3.3 Mounting of the handle in the operating position
29
2
3