Mounting Of The Handle; Mounting Of The Handle To Operation Position, Manual Mode - ABB Zenith ZTX Series Operation, Maintenance, And Installation Manual

—

9.5 Mounting of the handle

For more information of operating,
position indication and the selection of
the operating mode, see the Chapter 3.2
Operating and locking.
More information, see animation:
Manual and automatic operation -
TruONE® ATS (https://youtu.be/
bosvSPVi2sM).
Warning
Verify the condition of power source prior to
manually transferring. Manual operation may
result in out-of-phase transfer when both
sources are energized.
9.5.1 Mounting of the handle to
operation position, manual mode
Manual
mode
1
—
Fig. 9.2 Mounting the handle to the operating position;
turn the slide switch to the Manual mode (Hand), lift
the handle and place it to the operating position
61
2
3