Materials - Invacare Action Ampla User Manual

Invacare® Action® Ampla™
Seat width 505
Seat surface
height at rear
F
edge
G Backrest angle
H Backrest height
Footrest-to-seat
380 – 408 mm
I
distance
Leg-to-seat-
surface angle
Hand rim
diameter
Horizontal
location of axle
Minimum
turning radius
Stowage width
Stowage height
Stowage length
Overall length
J
without leg rests
K Overall height
48
Seat width 750
mm mm
340 mm 400 mm
92° 94°
485 mm 520 mm
333 – 420 mm
136°
520 mm
87 mm 90 mm
855 mm 970 mm
648 mm 875 mm
481 mm 415 mm
875 mm 975 mm
855 mm 920 mm
805 – 955 mm
Seat width 505
Pivot width
Maximum slope
angle brake
All dimension and weight specifications refer to a wide range
of the wheelchair in a standard configuration. Dimension
and weight (based on ISO 7176–1/5/7) may alter according
to different configurations. In some configurations, the
wheelchair exceeds the recommended dimensions for a
wheelchair.
IMPORTANT!
– In some configurations, the overall dimensions
of the wheelchair when it is ready for use
exceeds the authorised limits and the access to
emergency escape routes is not possible.
– In some configurations, the wheelchair exceeds
the size recommended for travelling by train
in the EU.

11.2 Materials

The components used to manufacture the wheelchair consist
of the following materials:
Frame tubes
Backrest tubes
Axle tube
Seat width 750
mm mm
1420 mm 1660 mm
7°
Aluminum
Aluminum
Aluminum
1650186-A