Table of Contents
Advertisement
Invacare® Action® Ampla™
7 Transport
7.1 Safety information
WARNING!
Risk of injury if the wheelchair is not properly
secured
In the event of an accident, braking manoeuvre,
etc. you may suffer serious injuries from flying
wheelchair parts.
– Always remove the rear wheels when
transporting the wheelchair.
– Position the wheelchair on the transportation
bearing, if installed, see 7.2 Transportation
Bearing, page 32.
– Firmly secure all wheelchair components in
the means of transport to prevent them from
coming loose during the journey.
IMPORTANT!
Excessive wear and abrasion could affect the
strength of load-bearing parts.
– Do not pull your wheelchair across abrasive
surfaces without the wheels fitted (e.g. pulling
the frame over tarmac).
7.2 Transportation Bearing
The wheelchair can be equipped with a transportation
bearing which decreases the dimension for easier
transportation and storage.
32
WARNING!
Risk of injury and damage to the wheelchair
The antitipper or transportation bearing can
brake due to material fatigue when stepping on it
and exerting force.
– Do not use the antitipper or transportation
bearing as a tipping aid.
1. Fold the backrest against the seat until it engages with
an audible "click".
2. Raise the wheelchair and place it on the castors of the
transportation bearing A.
1650186-A
Advertisement
Table of Contents
