Invacare Action Ampla User Manual page 36

Invacare® Action® Ampla™
Securing the wheelchair with a 4-point restraint system
WARNING!
– Place the wheelchair with the user
forward-facing in direction of vehicle travel.
– Engage the parking brakes.
The wheelchair tie-down positions where the restraint
system straps must be placed are marked with snap hook
symbols (see following figures and section 2.3 Labels and
symbols on the product, page 7 ).
1. Using the front and rear straps of the 4-point restraint
system, secure the wheelchair to the vehicle mounted
rails. Refer to the user manual supplied with 4-point
restraint system.
Front side tie-down positions for belt straps:
36
1. Attach the front straps to the eyelets A of the
transportation kit on both sides (see location of the
attachment labels).
2. Attach the front straps to the rail system referring to
best practice recommended instructions from the safety
belt manufacturer.
3. Disengage the parking brakes and apply tension to the
front straps by pulling the wheelchair backwards from
the rear.
4. Engage the parking brakes.
Rear side tie-down positions for snap hooks:
1650186-A