Haier HRF505VW User Manual page 21

EN
Problem
The appliance makes a
motor sound
It is not cold enough
inside th
e appli
ance.
inside
It is too cold
e appliance.
Moist
ure accumu
lates on the surface
of the appliance
Th
e cooling system
ot work.
does n
The sides of the
cabinet and door
strip get warm.
You hear an alarm
signal.
to open.
The door can't be
closed properly. It
always leaves a gap.
Possible Cause
The refrigeration unit has just
turned itself on. This is normal
The temperature is set too high.
Goods that are too warm have
been stored.
Too much food has been stored at
a time.
The goods are too close to each
other.
The door is not tightly closed.
The door has been opened too
frequently or for too long.
The temperature is set too low.
The Super Cool function is ac
tivated or has been running too
long.
The climate is too warm and too
damp.
Mains plug is not connected to the
mains socket.
The power supply is not intact.
This is normal.
The door is open
The temperature inside product is
too high
Once the appliance runs, it has an
internal vacuum.
Because of the appliances's low
temperature, the door seal can
easily get hard and deformed.
7 - Troubleshooting
Possible Solution
Reset the temperature.
Always cool down goods be
fore storing them.
Always store small quantities of
food.
Leave a gap between several
Close the door.
Do not open the door too fre
quently.
Reset the temperature.
function.
This is normal in damp climate
and will change when the hu
midity decreases. Wipe dry with
a cloth.
Connect the mains plug.
Check the electrical supply to
the room. Call the local elec
tricity company!
Close the door or silence the
alarm manually.
Open the door seal gent
air enter the appliacne.
Use a hair dryer or put a hot
towel on the spot where the
gasket is deformed.
When the gasket is soft once
again, close the door and com
press it tightly.
Super Cool
y to let
l
21