Table of Contents
Advertisement
EZ-0009 User's Manual
3.2 Simple On-chip debugging
This section describes the system configuration, startup procedure for debugging when
simple on-chip debugging is performed with EZ-0009-Emulator.
3.2.1 Debug functions
Table 3-3 lists the debug functions of this development kit.
Functions
Security ID
Download
Execution
Hardware break
Software break
Forced break
RAM monitoring
DMM (writing to memory during
RUN)
Pin masking
Time measurement
(from execution start to break)
User spaces used for
debugging
Function pins used for
debugging
Main clock condition
Note
Security ID can be set on configuration dialog of ID78K0-QB-MON-HCD, but this
setting is ignored.
Table 3-3 Debug Functions
Note
Unavailable
Available
Go & Go, Start from Here, Come Here, Restart, Step
execution
Unavailable
2000 points
Available except while interrupts are disabled
Unavailable
Unavailable
Available (external reset pin only)
Measurement resolution : 100us
Max. measurement time : Approximately 100 hours
Internal ROM : 902 bytes
Internal RAM : 16 bytes (used as stack)
TxD6, RxD6
Need to use external 8MHz oscillator
ZUD-CD-09-0191
Specifications
18/29
Advertisement
Table of Contents
