Installing It Properly - Whirlpool TT14DKXBN11 Use And Care Manual

Installing it properly
1. Allow 3 inches (7.5 cm) between over-
head cabinets and refrigerator top.
2. Allow at least 1 inch (2.5 cm) between the
refrigerator condenser on the back and
the wall.
JUI I I
3. Allow 1/2 inch (1.25 cm) on each side of
the refrigerator for ease of installation.
4. If the hinge side of the refrigerator is to be
against a wall, you might want to leave
extra space so the door can be opened
wider.
5. Level vour refriaerator.
Leveling it
Your refrigerator has two front, adjustable
rollers to prevent rocking on uneven floors.
To adjust rollers:
1. Roll refrigerator into position.
2. Adjust rollers by turning the leveling
screws, located at the front of the base.
l
Turn clockwise to raise.
l
Turn counterclockwise to lower.
NOTE: Rollers are adjusted correctly
when the refrigerator no longer rocks
when the doors are opened or closed.
3. Repeat this procedure whenever the
refrigerator is moved.
NOTE: If you want the doors to close easier,
use the rollers to raise the front of the
refrigerator slightly.
I I
Rlght to ralse; left to lower
Use a screwdrlver to adjust
Vlew of roller wlth hlnge In place
Lelellng
screw
6 C
WITH OUESTIONS ON
COMMENTS