Installing It Properly - Whirlpool TT14DK Use And Care Manual

Whirlpool no-frost refrigerator-freezer use and care guide tt14dk, tt14hd
Table of Contents

Advertisement

Installing
it properly
1.
Allow 3 inches (7.5 cm) between overhead
cabinets and refrigerator top.
2. Allow at least 1 inch (2.5 cm) between the
refrigerator condenser on the back and the
wall.
3. Allow '/2 inch (1.25 cm) on each side of the
refrigerator for ease of installation.
4. If the hinge side of the refrigerator is to be
against a wall, you might want to leave extra
space so the door can be opened wider.
5. Level your refrigerator.
Leveling
it
Your-refrigerator
has 2 front, adjustable
rollers to prevent rocking on uneven floors.
To adjust
rollers:
1.
Roll refrigerator into position.
2. Adjust rollers by turning the leveling
screws, located at the front of the base.
l
Turn clockwise to raise.
l
Turn counterclockwise
to lower.
NOTE:
Rollers are adjusted correctly
when the refrigerator no longer rocks
when the doors are opened or closed.
3. Repeat this procedure whenever the
refrigerator is moved.
NOTE: If you want the doors to close easier,
use the rollers to raise the front of the
refrigerator slightly.
I I-
Use a screw-
driver to adjust
View of roller
with hinge
in place
Leveling
screw
6

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TT14DK and is the answer not in the manual?

This manual is also suitable for:

Tt14hd

Table of Contents