Set Up The Control Head - Humminbird PiranhaMAX 165 Installation And Operation Manual

Set Up the Control Head

Use the Setup Menu to customize the settings of your PiranhaMAX unit.
• Set Sonar View Display Settings: Use the Setup Menu to set the
Contrast, Bottom View, and how fish are displayed on-screen.
• Set Units of Measurement: From the Setup Menu, open the Units
submenu to set the units of measurement for distance and speed. See
To Open the Units Submenu for instructions.
• International Units will have menu options such as Language and
Units of Measurement for depth, speed, distance, and temperature.
NOTE: Menu options are determined by your Humminbird® model. See the following
pages for full menu descriptions.
NOTE: If Simulator Mode is selected from the Start-Up Menu and a transducer is plugged
in, some menu setting changes will be saved in memory even after the unit is powered
down. Menu setting changes will not be saved when a transducer is not connected.
To Open the Setup Menu:
1. Press the POWER/MENU key.
2. Press the UP or DOWN Arrow key to select SETUP and press the
CHECK/ENTER key.
NOTE: See How to Use the Menu System for more information.
To Open the Units Submenu:
1. Press the POWER/MENU key.
2. Press the UP or DOWN Arrow key to select SETUP and press the
CHECK/ENTER key.
3. Select UNITS and press the CHECK/ENTER key.
NOTE: See How to Use the Menu System: Open a Submenu for more
information.
45
Set Up the Control Head