Preparation For Operation; Attention, Refer To Manual; Operators And Service Personnel; Checks Before Operation - EMC-PARTNER CDN2000-06-25 User Manual

5 Preparation for Operation

5.1 Attention, Refer to Manual

This manual is an integral part of the equipment CDN2000-06-25. The safety rules and precautions in
the manual must be observed. EMC PARTNER and their representatives accept no responsibility not
responsible for damages to persons and equipment as a results of non-observation of the safety
rules and precautions in this manual.
Before connecting the CDN2000-06-25 to a public power line, Chapter 3 „Safety must be carefully studied.

5.2 Operators and Service Personnel

Only trained personnel should carry out EMC tests. EMC PARTNER recommends its own seminars. For
small groups of maximum 10 persons EMC PARTNER AG offers the following in-house seminars in English
or German at the customer's location:
1. EMV Introduction
2. EMV Standardisation
3. EMC „ESD" immunity test
4. EMC „EFT" immunity test
5. EMC „SURGE" immunity test
6. EMC „DIPS" immunity test
7. EMC „HARMONICS" immunity test
8. EMC „MAGNETIC FIELD" immunity test
9. EMC „CW CURRENT INJECTION" immunity test
10. EMC „CE-MARK" transient immunity tests
11. „NEMP" immunity test
12. „AC, DC, IMPULSE" insulation test
13. Flicker

5.3 Checks before operation

5.3.1 Optical verification of the CDN2000-06-25

Before you unpack the CDN2000-06-25, please check whether the packing is deformed or damaged. When
the CDN2000-06-25 is unpacked, also check whether the tester is damaged. If you detect a damage, please
inform EMC PARTNER and the shipping organisation immediately.
Figure: 5.3.1-1
Please keep the shipping box on stock. The must be used in case of shipment for verification or repair.
E-CDN2000-06-25-E-Manual 25/54