Table of Contents
Advertisement
Please refer to the following sheet for log parameter information.
Parameter
Function
Host name
Set current host name. Max supports 32 characters.
Ethernet card
Set Ethernet card to config.
You can select from static and DHCP mode. In DHCP mode, it automatically
search IP while you cannot set IP/subnet mask/gateway. Plus IP/subnet
Mode
mask/gateway display values from DHCP. In static mode, you shall manually set
IP/subnet mask/gateway. To switch from DHCP to static, you must set IP
parameters again.
MAC address
Display host MAC address.
IP version
Select IP version IPV4 or IPV6. These two IP addresses both can be accessed.
IP address
Input new IP address to edit, and set subnet mask and default gateway.
Preferred DNS
DNS server IP address.
Alternate DNS
DNS server alternate IP address.
Figure 4-23 TCP/IP
38
Advertisement
Table of Contents
