A.4.2.Remote Control - Furuno WR2120 Operator's Manual

A.4.2. Remote control
1) Click [CONNECT] after entered the target ID of
host when access to the host side from the local pc.
2) Enter the password that set on the host side when
it asked the password after accessed.
3) When the PC screen on the host side is displayed,
it can operate in the same way as when using an
ordinary PC.
4) Close the window by clicking one of the [X] for the following three locations on the screen for
disconnecting the host side.
Caution:
Never click "Exit TeamViewer" from the TeamViewer icon from the host side task bar. If exit
TeamViewer on the host side, user has to go to the site unless there is no PC connected to the site
that possible to control using the remote access.
Click any of these to close TeamViewer
CAUTION: DO NOT TOUCH
77