Furuno WR2120 Operator's Manual page 59

VI. Enable FTP transfer of converted files
1) Setup FTP configurations
- Setup FTP_Converter.INI in "%DIR%\bin\" folder.
[FTP]
FTPSERVER=127.0.0.1
USER=user
PASSWORD=pass
PassiveMode=1
LOGDIR=D:\Converter\Output
Set IP address or name of target FTP server, given user name, and password for the user. It
can use Passive Mode when to set the value as "1". Set the folder name LOGDIR where the
FTP log file is stored.
- Define the output folder on the FTP server.
For example: SET FTPOUT=/
@echo off
cmd /C REM //**************************************************//
cmd /C REM // Launching and controlling data converters
cmd /C REM // created on 27 June 2019.
cmd /C REM // FURUNO ELECTRIC CO., LTD.
cmd /C REM //**************************************************//
SET CWD=%~dp0
@rem define the names of folders
SET SYS_DEV=C:
SET HDD=D:
SET APLDIR=C:\Users\radar\FURUNO
SET DIR=%APLDIR%\WR_Transfer
SET CNV_DIR=%HDD%\Converter
@rem define the names of install folders
SET CONV1=%APLDIR%\SCN2HDF5_Converter
SET CONV2=%APLDIR%\SCN2CfRadial_Converter
SET CONV3=%APLDIR%\SCN2NEXRAD_Converter
@rem define the names of folders for PICKER and FTP
SET PICKER=%APLDIR%\RainScnPickerForConverter
SET ScnFiles=%CNV_DIR%\Picker
SET OnlineFolder=%CNV_DIR%\Input
SET ArchiveFolder=%CNV_DIR%\Output
SET ErrFolder=.\err
@REM ****************************************************************
@REM FTP settings
@REM ****************************************************************
SET FTPTRANSFER=%APLDIR%\WR_Transfer\bin
1)
SET FTPOUT=/
SET FTPINI=%FTPTRANSFER%\FTP_Converter.INI
@rem Is FTP enabled ? (true/false)
SET ENABLE_FTP=false
Figure 5.13: Sample of AUTO_CONVERTER_FTP.BAT
49