Installation - Code CORTEXOPOS CR950 User Manual

5.0 - Installation

5.1 - Download the OPOSinstaller.zip file available
from codecorp.com/downloads.
5.2 - Run the CortexOPOSSetup executable, and
press Next when the screen below opens.
5.3 - Accept the Terms & Conditions and select
Next.
5.4 - You can specify a generic CortexOPOS
be created during installation. Keep the check-
box checked if you want the device created and
designate a device name in the text box. Uncheck
D008736_04 CortexOPOS User Manual
the box to skip the device creation step (device
will need to be created later in Device Manager).
Select the desired options and click Next. (Note:
If a generic CortexOPOS
previously, this screen will not be shown.)
5.5 - Select Install, then Finish to complete the
installation process.
device
TM
At this point, the CortexOPOS
installed. Prior to using a Code barcode reader with
the OPOS software, it must be configured for OPOS
operation (see Section 6 or 7).
If a generic device was created as part of the instal-
lation, the OPOS software application should be
able to connect to a properly configured device. If a
generic device was not created, then the
CortexOPOS
used to configure a Code device for use with OPOS.
device has been created
TM
service object is
TM
Device Manager application must be
TM
5