Adding A Usb Reader To The Cortexopos Device Manager - Code CORTEXOPOS CR950 User Manual

10.0 - Adding a USB Reader to the CortexOPOS Device Manager

10.1 - Open the CortexOPOS™ Device Manager.
10.2 - Plug a reader into the computer USB port.
10.3 - The Device Manager will detect a connected
barcode reader and display the following prompts—
select Yes to continue.
10.4 - Devices can be set up as generic or specific.
a. - Generic: Keep the Generic device checkbox
checked. To change the name of the device, modify
the text in the Device Name field. Press Finish to
save changes. A prompt box will appear asking the
user to confirm the changes—press Yes to confirm.
b. - Specific: Uncheck the Generic device check-
box. A list of connected devices will appear. High-
light the device you want to add and click Apply. A
prompt box will ask you to confirm—press Yes.
D008736_04 CortexOPOS User Manual
10.5 - Once the reader has been added to the
CortexOPOS™ Device Manager, the reader name
will appear in the Device list on the left.
10.6 - To delete a device, right-click on a device
name and select Delete Device. A prompt box will
appear asking the user to confirm the deletion—
press Yes to confirm.
7