Adding An Rs232 Reader (Or Modem) To The Cortexopos Device Manager - Code CORTEXOPOS CR950 User Manual

11.0 - Adding an RS232 Reader (or Modem) to the
CortexOPOS Device Manager
11.1 - Open the CortexOPOS™ Device Manager.
11.2 - Plug the reader, or CodeXML
the computer serial port. (Scan the QuickConnect
Code on the modem.)
TM
11.3 - Select Refresh under Device.
11.4 - Select the appropriate port from the Port
Mode list options.
Note: If the reader is an 8x based product select COM1,
COM2, etc. If the reader is an 82x based product reader,
select COM1 (8200), COM2 (8200), etc.:
D008736_04 CortexOPOS User Manual
11.5
Device Name as desired. Press Finish to save
modem, into
®
changes. A prompt box will appear asking the user
to confirm the changes—press Yes to confirm.
Note: All RS232 CortexOPOS™ devices behave as
generic devices, and are not tied to any particular
reader hardware or serial number.
- Select the desired baud rate. Modify the
8