Troubleshooting - Panasonic EH-NE35 Operating Instructions Manual

Troubleshooting

Troubleshooting
Problem Problem
During the hot air operation, cool air is
usually mixed, and even sparks appear.
(The spark is caused by the action of
thermoswitch as a protective device. It is
not a fault.)
The plug is abnormally overheating.
During operation, the unit outputs air
intermittently.
The cord is abnormally overheating.
Spark occurs in the ion outlet.
(EH-NE25/24/ENE2 only)
Abnormal noise occurs in the ion
outlet. (EH-NE25/24/ENE2 only)
22
Possible cause Possible cause
• When dust blocks the air inlet and
air outlet, the thermoswitch will be
started, and the cool air is usually
blown at the moment of start-up.
• The air inlet is blocked by hair or
hand, etc.
The household outlet connected to the
product may be loose.
The cord is damaged.
Dirty electrode is causing a malfunction.
Action Action
· Clear away the
accumulated dust
(see P.21 for
instructions).
· Do not block the air
inlet.
Please use a
well-conditioned
household outlet.
Immediately stop using
the unit.
Clean the parts in the
ion outlet (see P.21 for
instructions).