bObsweep WB4727546CH Quick Start Manual

Quick Start Guide

Congratulations on your new Bob and welcome to the bObsweep family!

Everything Bob needsfor his first clean can be found inside his box.

In just a few easy steps, Bob will be ready to work!

Install Bob's Side Brush

Bob's side brush allows him to sweep along corners,

walls, and other hard-to- reach places. To install the side brush: Flip Bob over onto a

flat surface. Secure the side brush into the socket on Bob's underside using the flathead

screwdriver and a screw found in Bob's box.

Plug the charging adapter into the side of the charging station.

The station's red power light will turn on. Place Bob on his charging station with the

metal plates on his underside lined up with the nodes on his station.

Prepare Bob's Remote

Bob's FullCommand™ remote runs on 2 AAA batteries (not included).

Bob is now ready to clean!

Press the START button on his cover

— or AUTO on his FullCommand™ remote —

and he will clean on his default

Robot setting.

Table of Contents

Need help?

Do you have a question about the WB4727546CH and is the answer not in the manual?

Page 1 Quick Start Guide Congratulations on your new Bob and welcome to the bObsweep family! Everything Bob needsfor his first clean can be found inside his box. In just a few easy steps, Bob will be ready to work! Install Bob’s Side Brush Bob’s side brush allows him to sweep along corners,...
Page 2 When it is time to charge for example, he looks around for his charging station but will only detect it when he faces it. That’s why bObsweep saves the last 15% of his battery to find his home. To increase Bob’s success rate in finding his home, make sure the station has an open space in front and sides, and is placed on a hard, flat surface.

732416