Advertisement
2a
Slide the roof panel into the roof profiles. Make sure the thick vertical wires are facing downwards.
Attach another top corner piece on the other side of the short roof profile.
3
Slide the remaining roof profile - 774 mm over the
roof panel and attach a corner piece.
5a
Attach 2 side profiles of 512 mm (f ) on the roof. Slide the back panel (b) into those 2 profiles.
Make sure that the vertical wires of the panel are facing outwards.
6
Assemble the 2 remaining side profiles (f ) on the
roof.
2b
4
Finally, slide the last roof profile - 440 mm over the
roof panel and attach the last top corner piece.
The roof of the bird cage is now installed.
5b
7a
Slide the 2 side panels (d) in the vertical profiles on both sides. Make sure that the closures are facing
outwards. Finally, slide the front panel in the vertical profiles. Make sure the door is facing outwards.
8a
Fix the 4 corner pieces (h) on the vertical profiles.
9
The wire part of your cage is now assembled.
Turn the wire part upside down and put in on the
plastic tray.
7b
8b
10
Install the accessories and your cage is now ready
for use.
Advertisement
