Download Print this page
CEL-FI QUATRA 4000 User Manual

CEL-FI QUATRA 4000 User Manual

Advertisement

Quick Links

QUATRA 4000
RANGE EXTENDER
Accessory
Model Number:
Q40-OE
Part Number:
592NQ40NEXT1NCUS7X01
Cel-Fi QUATRA 4000 Range Extender
USER MANUAL
June 2020
Compliance Contact
In the event of a regulatory compliance issue, please contact Nextivity
Inc. at www.nextivityinc.com.
Note: Certifications are regional; not all products need or have the
same certifications. Please check the specific model number to
determine exactly which certifications it has.
Patents
This product is covered by Nextivity, Inc., US patents and patents
pending. Please refer to www.cel-fi.com for details.
Support
Should you require any assistance, please contact your Cel-Fi
QUATRA reseller. If your questions cannot be answered immediately,
your reseller will forward your queries through the appropriate
channels to ensure a rapid response. If you still need assistance visit:
http://www.cel-fi.com/support.
Copyright © 2020 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity
and Cel-Fi logos are registered trademarks of Nextivity Inc. All other trademarks or
registered trademarks listed belong to their respective owners. Designed by Nextivity Inc
in California.
manual-quatra-4000-ext_gw_20-0602
CEL-FI QUATRA ACCESSORY

Advertisement

loading
Need help?

Need help?

Do you have a question about the QUATRA 4000 and is the answer not in the manual?

Questions and answers

Summary of Contents for CEL-FI QUATRA 4000

  • Page 1 Copyright © 2020 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity and Cel-Fi logos are registered trademarks of Nextivity Inc. All other trademarks or registered trademarks listed belong to their respective owners. Designed by Nextivity Inc in California.
  • Page 2 Cat 5e cable OVERVIEW 100 meter max The Cel-Fi QUATRA 4000 Range Extender is a Power over Ethernet (PoE) device that extends the maximum distance between the Cel-Fi QUATRA Network Unit and the Coverage Unit interconnect via cable Cel-Fi QUATRA Cel-Fi QUATRA lengths up to 200 meters.
  • Page 3 • Input and Output port LEDs should be clearly visible. • Allow adequate ventilation. • If both INPUT LEDs are off, check the cable to the Cel-Fi QUATRA • Do not mount in direct sunlight, near heat sources, or in weather NETWORK UNIT and that the NETWORK UNIT is powered up.
  • Page 4 See www.cel-fi.com for list of patents covering this product. General Information Electromagnetic Compatibility (EMC) Safety Precautions This equipment has been designed and tested to fulfill applicable • Use this product indoors. It should not be used outdoors. standards for: • This products is designed to be powered over Ethernet cabling.

This manual is also suitable for:

Q40-oe