CEL-FI DUO+ Quick Start Manual

Cel-Fi DUO+
™
Quick Start Guide
NETWORK UNIT
Cel-Fi DUO+ Smart Signal Booster
A true plug-and-play system that doesn't require the installation of antennas
or cables.
To use this product you need:
• An LTE compatible mobile phone with qualifying LTE service
• An area inside your home that receives at least one bar of 4G LTE
coverage
• Power Outlets
In this package you will find:
• Network Unit
• Coverage Unit
• Two Power Adapters
• Two Mounting Brackets with hardware
COVERAGE UNIT
™
Get More from Cel-Fi
Cel-Fi WAVE is an application available on both smartphones and desktop
computers that allows users to interact with Cel-Fi, to access advanced and
supplementary features.
Dashboard:
Glance-able view to the state of your Cel-Fi
environment.
Settings:
Change the default Operator, setup an external
antenna, name your Smart Signal Booster, and
more.
Advanced Mode:
Get a real-time technical overview of the installation
of your Cel-Fi Smart Signal Booster.
Booster Updates:
Keep your Cel-Fi Smart Signal Booster up-to-date
as new software versions become available.
Register
Upon purchase and receipt of your device, make sure to register with your
carrier. This is a quick and easy process. Use the link below to register your
Smart Signal Booster:
www.verizonwireless.com/solutions-and-services/
accessories/register-signal-booster
Copyright © 2017 by Nextivity, Inc, U.S. Patents pending. All rights reserved. The Nextivity
and Cel-Fi logos are registered trademarks of Nextivity Inc. All other trademarks or registered
trademarks listed belong to their respective owners. Designed by Nextivity Inc in California.
qsg_DUO-Plus-LTE_17-0227
WAVE
For more information, and software, go to:
www.cel-fi.com/wave