Table of Contents
Advertisement
1.4
Powering the IP-CAM360
The IP-CAM360 can be powered using a 12vDC power supply or via PoE. The camera draws
approximately 600mA using a 12vDC regulated power supply when IRs are switched on, so to
enable for headroom when first powered up, it is recommended using a minimum of a 12vDC
750mA regulated power supply. The camera is provided with a multi-function fly lead with a mini
power 2.1mm DC socket.
1.5
IP-CAM360 Cable connections
The IP-CAM360 has a multi-function fly lead with the following connections:
1) DC12v
2) Video
3)
Alarm In/Out
4) LAN
5) RESET
1.6
Audio In / Out
There is a miniature microphone housed in this camera and a speaker for audio output.
1.7
IR LEDs
There are three IR LEDs embedded in the black outer rim of the camera with an IR light sensor.
These should provide up to a 5 metre illumination.
I.R LED
This is the connection detailed in 1.4 above (Not used if powered by PoE)
This ia an analogue BNC connection for testing purposes
This is one alarm in (pins 1 & 2) and one alarm out (pins 3 & 4)
This is the LAN connection
This reset button, resets the camera to manufactuer's settings
AUDIO MICROPHONE
I.R LED
SPEAKER GRILL
6
I.R SENSOR
I.R LED
Advertisement
Table of Contents
