If you have an automatic ice maker, or if you
plan to add one later (contact dealer for ice
maker kii number), there are a few things
you will want to know:
For ET14JK, ET14HJ and ET14GK:
aluminum water inlet tube, supplied with
your refrigerator, is in the rear bottom of
the refrigerator, on the compressor support
plate. Use this tube instead of the tube
provided in the accessory kit.
The ON/OFF lever is a wire signal arm.
DOWN to make ice automatically
UP to shut off the ice maker
Do not turn ice maker on
until it is connected to the water supply.
for ice maker water supply
hook up are attached to the back of the
The dial or lever on the side of the ice
maker changes the size of the cubes.
Good water quality is important for good
ice quality. Try to avoid connecting the ice
maker to a softened water supply. Water
softener chemicals, such as salt from a
softener, can damage the
ice maker mold and lead to poor ice
quality. If a softened water supply cannot
be avoided, make sure that the water
softener is well maintained and operating