Solutions When "No Signal" Message Appears - Epson EF-100 Series User Manual

• Make sure the connected device does not require MHL; the projector's HDMI port does not support
MHL.
• Turn off the projector and the connected streaming device or video source, and then turn them back
on.
• Press the
be a problem with the connected video source, cable connection, or port.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• Make sure the computer's display resolution does not exceed the projector's resolution and frequency
limits. If necessary, select a different display resolution for your computer. (See your computer manual
for details.)
• If the other solutions do not solve the problem, reset all of the projector settings using the options on
the Reset menu.
Parent topic:
Related references
Projector Light Status
Projector Reset Options - Reset Menu
Related tasks
Connecting the Streaming Device
Connecting to an HDMI Video Source
Turning On the Projector
Turning Off the Projector

Solutions When "No Signal" Message Appears

If the "No Signal" message appears, try the following solutions:
• Turn on the connected computer or video source, and press its play button to begin your presentation,
if necessary.
• Check the connection from the projector to your video sources.
• If you are projecting from a laptop computer, make sure it is set up to display on an external monitor.
• If necessary, turn the projector and the connected computer or video source off and then on again.
• Try a different video cable.
• If the other solutions do not solve the problem, reset all of the projector settings using the options on
the Reset menu.
menu button on the projector remote control. If the projector menu displays, there may
Solving Image or Sound Problems
89