Epson EF-100 Series User Manual page 74

Options
HDMI Link
Sleep Mode
Sleep Mode Timer
Direct Power On
Illumination
Child Lock
Control Panel Lock
USB Power in Standby Mode
Rear Bay Cooling
Parent topic: Adjusting the Menu Settings
Related tasks
Saving Settings to Memory and Using Saved Settings
Description
Adjusts HDMI Link options that allow the projector remote
control to control HDMI-connected devices that support the
CEC standard
Device Connections: lists the device connected to the
HDMI port
HDMI Link: turns HDMI Link on or off
Power On Link: controls what happens when you turn on
the projector or connected device
Power Off Link: controls if the connected device is turned
off or not when you turn off the projector
Select On to place the projector in standby mode after a
certain interval of inactivity
Sets the sleep mode interval between 1 and 30 minutes
Turns the projector on when it is plugged in instead of using
the power button
Turns off the indicators on the projector
Locks the power button on the control panel
Controls projector button locking to secure the projector
Full Lock: locks all buttons on the control panel
Partial Lock: locks all buttons on the control panel except
the power button
Sends power to the connected device even if the projector is
in standby mode (when the power is off). If the internal
temperature of the projector gets too high, the power supply
may stop automatically.
This feature is not available in all countries.
Sets the cooling fan speed for the connected device
74