Filling The Boiler Tank During Use - ARIETE 4203 Manual

Upholstery brush ⑤
The fabric brush can be fitted straight onto the gun nozzle (G) or to the extension tubes ⑧. When
the handy cloth ⑭ is fitted, it is possible to use the brush to remove dust and for daily cleaning of
sofas, armchairs, blankets, mattresses and cushions (
up fabrics, removing all creases. In any case, we recommend, when using for the first time and
during normal use, to discharge the condensation from the steam into a container so as not to wet
the fabrics ( ).
8
Window brush ⑥
A window wiper brush can be fitted to the fabric brush ⑤: to assemble the two, just insert the tabs at
the base of the fabric brush into the hooks at the bottom of the window wiper brush. Use the window
wiper to restore the polished shine to windows, mirrors and gloss surfaces. It is also easy to use on
shower cubicle glass, removing the problem of lime scale (
Floor brush ⑦
This accessory is used on extension tubes ⑧ and it has handy cloth grips that can hold, as well as
the cloth provided ⑬, any type of machine washable cloth. To fit the cloth, place the brush in the
middle, lift the clips at the ends of the brush, insert a flap of cloth and then release the clips (
Extension tubes ⑧
The extension tubes snap together and can be easily separated by pressing the release button.
They are useful for reaching high surfaces with the window wiper ⑥, using the special extension
joint, or they can be used with the floor brush ⑦ (
Attachment bag ⑨
The appliance comes with a bag for the attachments, which is handy for storage as well as for keep-
ing them close at hand.

FILLING THE BOILER TANK DURING USE

If the boiler tank should become empty during use, switch off the appliance, unplug it from the mains
power and proceed as follows:
• Press the steam dispensing button (L) to discharge any residual steam.
• Slowly unscrew the boiler tank filler cap (A) waiting a few seconds for the steam to finish before
unscrewing it completely. Wait a few minutes before adding water to the boiler tank.
• Add more water, making sure to pour it in slowly to prevent new bursts of steam from forming.
We recommend waiting at least 3 minutes from the time of unplugging the appliance before
•
adding more water to the boiler tank.
• Firmly screw the boiler tank filler cap (A) back into place.
• Plug the appliance to the power mains.
• Press the on switch (E).
). The brush can also be used to freshen
7
).
9
).
11
- 9 -
EN
).
10