Changing The Light Bulbs - Whirlpool ED22RQ Use And Care Manual

Changing the light bulbs
Electrical Shock Hazard
Before removing a light bulb, either unplug
the refrigerator or disconnect the electricity
leading to the refrigerator at the main power
supply. Failure to do so could result in elec-
trical shock or personal injury.
To change refrigerator light:
1. Disconnect refrigerator from power supply.
2. Reach behind the Control Console to find bulb.
3. Remove bulb.
4. Replace with a 40-watt tubular appliance bulb.
5. Reconnect to power supply.
To change crisper light:
1. Disconnect reirigerator from power supply.
2. Pull top of light shield forward until it snaps free.
3. Lower light shield to clear bottom supports.
4. Pull light shield straight out to remove.
5. Replace bulb with a 40-watt appliance bulb.
6. Replace light shield in reverse order.
7. Reconnect potter supply.
To change light below ice bin:
1. Disconnect relrigerator from power supply.
2. Push in sides lof light shield until it snaps free
3. Replace bulb with a 40-watt appliance bulb.
4. Replace the light shield.
5. Reconnect poNer supply.
To change dispenser light:
1. Disconnect refrigerator from power supply.
2. Reach the bull3 through the dispenser area.
3. Replace with a heavy-duty lo-watt bulb, which
can be purchased from your Whirlpool dealer.
4. Reconnect power supply.
NOTE: Not all commercial appliance bulbs will
fit your unit. Be sure to replace a bulb with one of
the same size and shape.
9