Removing Ice Maker Storage Bin - Whirlpool ED22RQ Use And Care Manual

Using Your Refrigerator
Continued
Removing ice maker storage bin
Remove, empty and clean the storage bin:
l
If the ice dispenser has not, or will not, be used
for a week or more:
l
If a power failure causes ice in the bin to melt and
freeze together;
l
If the ice dispenser is not used regularly.
1. Pull the covering panel out from the bottom and
slide it to the rear.
2. Lift the signal arm so it clicks into the OFF
position. Ice can still be dispensed, but no more
will be made.
3. Lift the front of the storage bin. Pull it out
4. Empty the bin. Use hot or warm water to melt
the ice if necessary. Never use anything
sharp to break up ice in the bin. This can
damage the bin and dispenser mechanism.
5. Wash with mild detergent. Rinse well. Do not
use harsh or abrasive cleansers or solvents.
6. When replacing the bin, make sure it is pushed
in all the way. Push the signal arm down to the
ON position to restart ice production.
12