Update The Modem Firmware Over The Air (Fota); Prerequisites; Step 1: Find The Modem Firmware Version; Step 2: Determine The Update String - Digi Connect Sensor Update Manual

Update the modem firmware over the air (FOTA)

This section describes how to update the modem over the air. The update process is initiated from the
Digi Remote Manager. It requires a working cellular connection. It does not require physical access to
the device.

Prerequisites

Remote manager account
n
Device ID of the Connect Sensor to update
n
Modem IMEI
n
fota.exe application
n

Step 1: Find the modem firmware version

You need to determine the modem firmware version on the device by using the IMEI look-up tool. This
information is used to
1. Make sure you have the IMEI number from the device.
2. Navigate to the Digi Verizon Upgrade page:
3. In the IMEI look-up tool window, enter the IMEI number from the device.
4. Click Find. The modem firmware version number displays in the field.
5. Make a note of the version number to use in the

Step 2: Determine the update string

Find the firmware revision below, and copy the corresponding update string.
Model LE910-SV1 and Revision 20.00.012.2
Update file name: UpdPkg_LE910_SV1_1G_20.00.012.2_20.00.015.0.bin
Patch size: 4228650
Update string:
ZnRwMS5kaWdpLmNvbQAyMQBhbm9ueW1vdXMAdGVzdABzdXBwb3J0L3RlbGl0AFVwZFBrZ19MRTkxM
F9TVjFfMUdfMjAuMDAuMDEyLjJfMjAuMDAuMDE1LjAuYmlu
Model LE910-SV1 and Revision 20.00.012.3
Update file name: UpdPkg_LE910_SV1_1G_20.00.012.3_20.00.015.0.bin
Digi Connect® Sensor Telit Modem Firmware Update - Verizon
(PN 80010027)
determine the update string in the next step.
https://www.digi.com/verizon-upgrade
next step.
6