Safety And Maintenance Information; Responsibilities; Safety Instructions - Metcom Solutions COM200 Series Product Manual

2 Safety and maintenance information

2 Safety and maintenance information
2.1

Responsibilities

The owner of the communication module is responsible to assure that all authorized persons
who work with the meter read and understand the relevant sections of the User manual that
explains the installation, maintenance and safe handling with the module.
The installation personnel must possess the required electrical knowledge and skills and must
be authorized by the utility to perform the installation procedure.
The personnel must strictly follow the safety regulations and operating instructions, written in the
individual chapters of the Product Manual.
The owner of the module is responsible specially for the protection of the persons, for
prevention of material damage and for training of personnel.
2.2

Safety instructions

The following safety regulations must be observed:
• During the communication module installation, the user should be careful not to get in
contact with live parts is dangerous to life.
• Local safety regulations must be observed. Installation of the module must be performed
exclusively by technically qualified and suitably trained personnel.
• Modules which have been dropped must not be installed, even if no damage is apparent.
They must be returned for testing to the service and repair department responsible (or the
manufacturer). Internal damage can result in functional disorders or short-circuits.
• The module must on no account be cleaned with running water or with high pressure
devices. Penetrating water can cause short-circuits.
COM200 module - Product Manual 1.0
Node sayaç Çözümleri Ltd. Şti.
Metering Solutions
Page 7 of 25
MetCom Solutions GmbH
www.node.com.tr