1 Overview
1.1
Referenced documents
Title
Electricity metering – data exchange for meter reading, tariff and load
control – part 21
Electricity metering – data exchange for meter reading, tariff and load
control – part 53 COSEM application layer
Electricity metering – data exchange for meter reading, tariff and load
control – part 62 Interface classes
Electricity metering – data exchange for meter reading, tariff and load
control – part 61:
Object Identification System (OBIS)
Electricity metering equipment (AC) – general requirements, test and test
conditions – part 11
Electricity metering equipment (AC) – general requirements, test and test
conditions – part 21:
static meters for active energy, (classes 1 and 2)
Electricity metering equipment (AC) – general requirements, test and test
conditions – part 22:
static meters for active energy, (classes 0,2S and 0,5S)
Electricity metering equipment (AC) – general requirements, test and test
conditions – part 23:
static meters for reactive energy, (classes 2 and 3)
Electricity metering equipment (AC) – part 1: general requirements, test
and test conditions, – metering equipment (class indexes A, B and C)
Electricity metering equipment (AC) – part 3: particular requirements –
static meters for active energy (class indexes A, B and C)
Environmental Management System
DLMS Blue Book version 1000-1 Ed. 12.1, interfaces classes, OBIS
definition
DLMS Green Book version 1000-2 Ed. 8.1, architecture and protocols
DLMS Yellow Book version 1000-2 Ed. 8.1, conformance & testing
IDIS Standard Package 2, Edition 2.0.pdf
IDIS-S02-004 - object model Pack2 Ed2.0.xls
COM200 module - Product Manual 1.0
Node sayaç Çözümleri Ltd. Şti.
Metering Solutions
Page 5 of 25
Version
Datum
EN 62056-21
06.2002
EN 62056-53
06.2002
EN 62056-62
06.2002
EN 62056-61
06.2002
EN 62052-11
02.2003
EN 62053-21
01.2003
EN 62053-22
01.2003
EN 62053-23
01.2003
EN 50470-1
09.2005
EN 50470-3
09.2005
ISO14001e.pdf
10.2011
Ed. 12.1
Ed 8.1
Ed. 3
Ed. 2.0
03.06.2014
V2.26
26.08.2016
MetCom Solutions GmbH
www.node.com.tr
Need help?
Do you have a question about the COM200 Series and is the answer not in the manual?