Summary of Contents for Metcom Solutions COM200 Series
- Page 1 COM200 Series GSM/GPRS communication module Product Manual Document name COM200 Manual_EN_V1.doc Document number: Revision 1.0 Date of version: 27.02.2019 www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions...
- Page 2 NOTICE The information contained in this document is subject to change without notice. MetCom Solutions GmbH shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
-
Page 3: Table Of Contents
8.1 Module settings ......................21 8.2 Module status readings ....................22 8.3 Push setup Settings ...................... 23 Type key .......................... 24 Technical data ....................... 25 COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 4: Overview
More details are described in the specific user manual of the other COM Series modules. In particular, this document describes the COM200: GSM/GPRS - 2G Cellular communication module COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 5: Referenced Documents
DLMS Yellow Book version 1000-2 Ed. 8.1, conformance & testing Ed. 3 IDIS Standard Package 2, Edition 2.0.pdf Ed. 2.0 03.06.2014 IDIS-S02-004 - object model Pack2 Ed2.0.xls V2.26 26.08.2016 COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 6: Definitions And Abbreviations
Grab data form meter Transport Layer Security Short Message Service File Transfer Protocol Transmission Control Protocol User Datagram Protocol Internet Protocol Serial Peripheral Interface COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 7: Safety And Maintenance Information
Internal damage can result in functional disorders or short-circuits. • The module must on no account be cleaned with running water or with high pressure devices. Penetrating water can cause short-circuits. COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 8: Maintenance
Waste Electric and Electronic (WEEE) Directive! Disposal The components used in the COM200 series modules are largely recyclable according to the requirements of the environmental management standard ISO14001. Specialized disposal and recycling companies are responsible for material separation, disposal and recycling. The following table identifies the components and their treatment at the end of the life cycle. -
Page 9: Mechanical Design
SPI interface between meter and communication module for local customized applications. • Transparent communication, using the DLMS/COSEM protocol of the meter for Local or Remote FW Meter or Module upgrade COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 10: Module Housing
Figure 3: COM200 with internal antenna Figure 4: COM200 prepared for external antenna connector SMA or FME type Figure 5: COM200 with sealable cover (Option) COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 11: Functionality
Default 4000 (for EN62056-21 communication) • Socket 2: address: Default 4059 (for DLMS/COSEM communication) • Socket 3: address: Default 4060 (for DLMS/COSEM communication) COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 12: Push Support
"Push" method of relevant "Push Setup" objects. At the end, the "Push" method of "Push Setup" object sends the specified message/data to the Central System. COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. -
Page 13: Push Triggering
If an Alarm happens, these objects call a fourth script in "Push Script Table" object (9,0- 0:10.0.108.255) and the called script invokes the "Push" method of "Push Setup-Alarm" object (40, 0-4:25.9.0.255). COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 14: Push Triggering By Gprs Connection Detection
With the FTP Push method predefined data can be send to a predefined Server. Parameters for the FTP push are • Server • Port number • User name and password • File name and path • timeout COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 15: Push Method Using Tcp
With the COM200 the time & date of the meter can be synchronized by an external NTP server. The synchronization take place: - After power up of the meter - At a configurable time, after the communication module is restarted COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 16: Hw Variants
Support of RS485 interface The COM200 with external antenna provides an additional RS485 interface, which can be used to read other meters connected to the Bus. COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 17: Installation
3. Insert the Sim card to the communication 4. Connect the external antenna (If available) Module 5. Plug in the new communication module 6. Close the meter terminal cover COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 18: Signal Strength & Provider Check
OBIS identifier: 131.3.0 Provider indication Additionally, the provider of the GSM/GPRS communication can be seen on the LCD under the OBIS identifier: 25.6.0 COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 19: Fw Upgrade
Using this Plugin to download the application Firmware to the module. Below step by step procedure: • Load a Firmware image file and download to the module COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 20: Firmware Activation
Select “Activate firmware LATER” and select the date and time for the delayed activation and press “Activate image LATER” • Afterwards read current application firmware version and signature of the module COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 21: Module Configuration Tool
Below module settings are supported • Pin Code of the SIM card • APN address • Username • Password • Daily reset time • Socket definitions COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 22: Module Status Readings
Signal quality in dBm o Bit error rate o Mobile country code • Adjacent cells info • IMEI = Serial Number of the Cellular Module COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 23: Push Setup Settings
List – Clock triggered C • Push setup – Trigger o Scheduler list A o Scheduler list B o Scheduler list C COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 24: Type Key
0 without RS485 interface S with RS485 interface Reserved for future use COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions... -
Page 25: Technical Data
Connector type: SMA (Female) or FME (Male) External Dual band 900 / 1800 MHz Frequency band s 850 / 1900 MHz Quad Band Weight 0,1 kg COM200 module - Product Manual 1.0 MetCom Solutions GmbH www.node.com.tr Node sayaç Çözümleri Ltd. Şti. Metering Solutions...
Need help?
Do you have a question about the COM200 Series and is the answer not in the manual?
Questions and answers